Yes, LF is different from F and I'm using a different programmer (pickit2) running at 3.3 volts.

Using AN589 and ICprog I made a lot of project in the last 3 years.

I'm using the 2.50 version and I can see the PIC in the processo list.

My question is regardin the configuration bits, using PICKIT 2.

How I can select any bits of configuration word 1 (CONFIG1) using PBP 2.50, like @CONFIG or OSCCON %01001110 or __CONF or ... like described on pade 89 of PICF72X/PIC16LF72X manuals.

I want, for the moment, to see just a led blinking.

Thanks
Bye