16f887 44 pin demo board code problem?

Results 1 to 10 of 10

Threaded View

  1. - 5th December 2008, 18:14 #4
    Bruce's Avatar
    Bruce
    Bruce is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,405

    Did you find this post helpful? Yes | No

    Default

    Am I correct in thinking that for 4 MHz I would include in my program OSCCON %01100xxx, I'm not sure what bits 0, 1 and 2 would be set to?
    Yes. OSCCON = %01100000 would set it to 4MHz. Bit 0 SCS allows you to switch from the osc set in config to internal. Bits 1, 2 and 3 are read only bits that indicate the oscillator status.

    Look at the modified version of your example attached here for a few other comments. I haven't tested this, but it should help get you up & running.
    Attached Files Attached Files
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com
« Previous Thread | Next Thread »

Similar Threads

  1. How much code space do PBP statements use.
    By Darrel Taylor in forum Code Examples
    Replies: 5
    Last Post: - 13th February 2009, 22:31
  2. Making Program Code Space your playground...
    By Melanie in forum Code Examples
    Replies: 15
    Last Post: - 19th July 2008, 09:26
  3. Help with 18F4520 on PICDEM 2 Plus Demo Board 2006
    By kennYy in forum mel PIC BASIC
    Replies: 2
    Last Post: - 28th April 2008, 17:12
  4. 7 segment digit problem (using Mister E's code)
    By jmgelba in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 9th September 2005, 21:25
  5. SRF04 Range Finder 16F628 R18iXL Board
    By Spindle in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 20th June 2005, 03:08

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules