Decrease the pauses to pause 1 and see what happens.
Hi Javier,
Which programmer are you using when you don't use the bootloader? Did you set it up in Microcode Studio? You may have to set the configuration settings for your programmer manually, or you may have to change a setting to allow the programmer to read from your file first.
Good Luck,
Jerry
If your oscilloscope costs more than your car...
OK, problem solved. On my MicroCode Studio Plus it was showing the In Circuit Debug (ICD) toolbar. I was pressing ICD compile and program button instead of the normal compile and debug button. Now everything is working 100%.
Thanks to all of you for your kind help.
Javier.
Bookmarks