Anyone working with the MRF24J40MA's?

[Leviticus]

I also am working with two MRF24j40a products. I have a clasic "bit banger" device, so I am writing C/C++ code from the Microchip's MRF24j40 data sheet. If you manage to make your devices work, then may I have a listing of what you wrote to the registers? Also what mode did you use? Beacon or non beacon? Transmission command?

E.G.
Register_Addres, BYTE_Value
0X00, 0X03
0X01, 0X21
.
.
.
0X3E,0X1A
0X3F,0X01


I would rather arrest highway traffic to nibble rancid road kill than try to unscramble Microchips example microcontoller code. They use very obscure varible references and encrypted syntax.

[email protected] (ALIAS:Leviticus)

[Leviticus]

I do not know what happened to my previous post?

I have developed drivers for the MRF24J40 with C/C++. If you want to develop a project with this device. Email me for a copy of this class. You need to have some drivers for your particular hardware, but I have most the tedious work done.

[Leviticus]

If you need help with your MRF24j40MA or MRF24j40MB firmware then please visit my Web site! I will provide some firmware help for free.

www.MRF24j40MA.com

Life is too short, so do not waste your time cursing!

[ScaleRobotics]

I wonder if this is a typo?

"NO software or services will be furnished to despotic turd world countries such as ....."

*Edit: Looks like he has removed that restriction policy. He now does service despotic turd world countries.