Stepper motor controller

Results 1 to 23 of 23

Threaded View

  1. - 1st February 2009, 21:03 #9
    DarthV's Avatar
    DarthV
    DarthV is offline Junior Member
    Join Date
    Jan 2009
    Posts
    4

    Did you find this post helpful? Yes | No

    Thumbs up

    Hi, guys....well let me describe better what the needs are, i have 2 PWM servo outputs, each one is driving each servo from left to right,..., with a 5V TTL logic level, movement from left to right is changing the pulse width from 1ms to 2ms, with 1.5ms at center position,....the movement is like 0....to...60 degrees minimum angle, or a maximum 90 degress !

    Thanks
    Last edited by DarthV; - 1st February 2009 at 23:16.
« Previous Thread | Next Thread »

Similar Threads

  1. 18f4431; driving a stepper IN HARDWARE mode
    By DDDvvv in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 21st January 2010, 17:49
  2. How to program PIC16F877A stepper motor revolution [Full circuit & 3/4 Code]
    By slapdash in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 6th November 2008, 11:27
  3. Controlling stepper motor with PIC
    By The Master in forum Off Topic
    Replies: 3
    Last Post: - 1st July 2008, 11:21
  4. Driving Stepper Motor with PBL3717
    By crhomberg in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 8th November 2007, 21:59
  5. problem with stepper!!
    By ibra in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 7th August 2007, 17:41

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules