Try the "Compile Only" button or F9 from the keyboard.
|
Try the "Compile Only" button or F9 from the keyboard.
Dave
Always wear safety glasses while programming.
|
This always help when we know the PIC model, and see the configuration fuses... here make sure you're using HS_OSC.
Not sure how ICD work with LAB-X1... maybe you need to reset the PIC first?
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
I am programming a 16F877a part and the HS Fuse is set. It seems I'm having another problem now and then I cannot program directly into the lab X Board. He keeps asking me to reset the microcontroller, however the microcontroller on the board will not reset. I'm sure it's not the programmer because I can program externally.
|
If you use MicroCode Loader, then you may have some problem... hence why the ICD doesn't work. Sorry i feel lazy now, not a bad idea to compare the LAB-X1 circuit with the recommended schematic for ICD and Bootloader... Bootloader and ICD have a MCLR signal attached to the MAX232.. not sure if the LAB-X1 have it
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks