Hardware or software?
From the manual under SERIN2
[quote]
A DEFINE allows the use of data bits other than 8 (or 7 with parity).
SER2_BITS data bits may range from 4 bits to 8 (the default if no
DEFINE is specified). Enabling parity uses one of the number of bits...
[quote]
Dave
Always wear safety glasses while programming.
7 bit ASCII to 16F877
To mackrackit
To what manual are you refering?
The only manual I'm using are the PICmicro Mid-Range MCU Family Reference Manual & the PIC16F877 Data Sheet.
I'm using USART on port RC6 & RC7 to transmit & Recieve.
The Pic Basic Pro or Pic Basic manual.
You are not using either one are you? Well that is the language we use here. What language are you using? Might be able to point you in the right direction.
Dave
Always wear safety glasses while programming.
To mackrackit
I'm Using ASM
Using ASM, this is the place for you
http://www.piclist.com/techref/piclist/index.htm
But I have to give a plug for basic
http://www.melabs.com/
They have a demo
http://www.melabs.com/pbpdemo.htm
Yes it cost some, but soooo much easier. At least we think so here.
Have a good one!
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks