PIC18F4550 Error[128] Missing Arguments

[damalu]

I have some problems with MicroCode Studio, I've tried to compile a simple program that turns on and off a LED using pic18f4550, I've change the INC file for the compiler get off the warning CONFIG Directive. But now I got this error message:
Error[128] c:\pbp246\18f4550.inc 20: Missing argument(s) (configuration byte setting is missing)
Error[128] c:\pbp246\18f4550.inc 21: Missing argument(s) (configuration byte setting is missing)
Error[128] c:\pbp246\18f4550.inc 22: Missing argument(s) (configuration byte setting is missing)
Error[128] c:\pbp246\18f4550.inc 23: Missing argument(s) (configuration byte setting is missing)
Error[128] c:\pbp246\18f4550.inc 24: Missing argument(s) (configuration byte setting is missing)

I'm new programing pic's and i don't understand the error, please please help me!!!!

here's how the INC file says:

 ;****************************************************************
;*  18F4550.INC                                                 *
;*                                                              *
;*  By        : Leonard Zerman, Jeff Schmoyer                   *
;*  Notice    : Copyright (c) 2004 microEngineering Labs, Inc.  *
;*              All Rights Reserved                             *
;*  Date      : 12/31/04                                        *
;*  Version   : 2.46                                            *
;*  Notes     :                                                 *
;****************************************************************
        NOLIST
    ifdef PM_USED
        LIST
        "Error: PM does not support this device.  Use MPASM."
        NOLIST
    else
        LIST
        LIST p = 18F4550, r = dec, w = -311, f = inhx32
        INCLUDE "P18F4550.INC"	; MPASM  Header
        CONFIG =   CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
        CONFIG =   CONFIG1H, _FOSC_HSPLL_HS_1H
        CONFIG =   CONFIG2H, _WDT_ON_2H & _WDTPS_128_2H
        CONFIG =   CONFIG3H, _PBADEN_OFF_3H
        CONFIG =   CONFIG4L, _LVP_OFF_4L & _ICPRT_OFF_4L & _XINST_OFF_4L
        NOLIST
    endif
        LIST
EEPROM_START	EQU	0F00000h
BLOCK_SIZE	EQU	32

[mackrackit]

I am sure you have read this
http://www.picbasic.co.uk/forum/showthread.php?t=543
but jump down to post #29 by Darrel.

[damalu]

I am sure you have read this
http://www.picbasic.co.uk/forum/showthread.php?t=543
but jump down to post #29 by Darrel.

Thanks for answering
Yes you are right I've already read that, but I believe that's not the problem, al least the Error[128] have something to do with the CONGIF directive, 'cause when I change the INC file, the error about it dissapears.
The Error[128]: c:\pbp246\pic18f4550.inc 20: Missing arguments (configuration byte setting is missing), I believe the numbers are for the all lines in the INC file that have problems (20-24) and yes... that lines are the CONFIG.
Anyway I tried the solution that Darrel gave, but the error stills here!!!
More ideas, please I really need them!!!

[Darrel Taylor]

The format of your config lines are incorrect.

    CONFIG =   CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L

Should be ...

    __CONFIG   _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
    |          |
    |          1 underscore
    2 underscores

[mister_e]

and probably not a bad idea to add what's in red, just to disable the warning message forever.

LIST p = 18F4550, r = dec, w = -311, w = -230, f = inhx32

[damalu]

Problem solve, the error 128 was gone forever.
But now I have another one , the error 113, can you tell me how can I fix it, it says something like this:
Error[113]: c\pbp246\pic18f4550.inc 20: Symbol not previusly defined (_PLLDIV_5_1L)
Error[113]: c\pbp246\pic18f4550.inc 20: Symbol not previusly defined (_CPUDIV_OSC1_PLL2_1L)
Error[113]: c\pbp246\pic18f4550.inc 24: Symbol not previusly defined (_ICPRT_OFF_4L)
Error[113]: c\pbp246\pic18f4550.inc 24: Symbol not previusly defined (_XINST_OFF_4L)