Help with a draft of a robóvia rf

[cesar35]

Dear mackrackit I'm taking stick.
At picbasic I'm very difficult to understand I'm using the English translator. Could make new code. For me.
I will be grateful.

[mackrackit]

I do not have time to write your code.
But here is some old code you can look at to see how Pic Basic code is written.
It basically is a test code for a POT.
And read the threads I linked you to earlier.

'#####################
'16F877A

DEFINE OSC 20

'####################
'LCD SET UP
DEFINE LCD_DREG     PORTB
define LCD_DBIT     4
DEFINE LCD_RSREG    PORTB
DEFINE LCD_RSBIT    1
DEFINE LCD_EREG     PORTB
DEFINE LCD_EBIT     0
DEFINE LCD_BITS     4
DEFINE LCD_LINES    2
DEFINE LCD_COMMANDUS    2000
DEFINE LCD_DATAUS   50

'#####################
V1		VAR	BYTE
LED	VAR	PORTD.2

PAUSE 1000

RUN:
LCDOUT $FE,1,"POT"
LCDOUT $FE,$C0,DEC V1
PAUSE 100
POT PORTC.7,127,V1
IF V1 < 100 THEN
GOTO LMP1
ELSE 
GOTO LMP2
ENDIF
GOTO RUN

LMP1:
HIGH LED
GOTO RUN

LMP2:
LOW LED
GOTO RUN

END

[cesar35]

Dear mackrackit I am very grateful for pacincia.
more just one more dica.Porque that picbasic Compiler without error. generates the hex normal. more pic does not send the data for the receiver. thank you again ..

[mackrackit]

Sorry, I did not quite understand the last post.

Are you saying that you got the Ruff Bot code to compile but it is not working?

If so post your code that compiles and I will assume you have the hardware exactly as shown on the web page?

[cesar35]

code asm:

; PicBasic Pro Compiler 2.46, (c) 1998, 2005 microEngineering Labs, Inc. All Rights Reserved.
PM_USED EQU 1

INCLUDE "16F84A.INC"

RAM_START EQU 0000Ch
RAM_END EQU 0004Fh
RAM_BANKS EQU 00001h
BANK0_START EQU 0000Ch
BANK0_END EQU 0004Fh
EEPROM_START EQU 02100h
EEPROM_END EQU 0213Fh

R0 EQU RAM_START + 000h
R1 EQU RAM_START + 002h
R2 EQU RAM_START + 004h
R3 EQU RAM_START + 006h
R4 EQU RAM_START + 008h
R5 EQU RAM_START + 00Ah
R6 EQU RAM_START + 00Ch
R7 EQU RAM_START + 00Eh
R8 EQU RAM_START + 010h
FLAGS EQU RAM_START + 012h
GOP EQU RAM_START + 013h
RM1 EQU RAM_START + 014h
RM2 EQU RAM_START + 015h
RR1 EQU RAM_START + 016h
RR2 EQU RAM_START + 017h
_PORTL EQU PORTB
_PORTH EQU PORTA
_TRISL EQU TRISB
_TRISH EQU TRISA
INCLUDE "TX.MAC"
INCLUDE "PBPPIC14.LIB"


END
:020000000128D5
:02400E00FD3F74
:00000001FF

[mackrackit]

Post the Pic Bacic code, not the ASM it generates.

[cesar35]

Dear mackrackit I'm very difficulties of the code intend to do that.
which commands. that missing to set the program's peak. " I thank you for everything.