getting started

[cunninghamjohn]

Thanks for your help so far dave, I have sorted the problem out now. I have 2 hard drives installed on my computer, and ended up with the mecanique folder on D: and mpasm on C: or something, so I think the program was looking in the wrong place for the INC files. I now have a set of flashing LEDs in front of me, so im off to a good start and very pleased.

Thanks very much Dave
BR John

[mackrackit]

COOL!
More fun with BLINKY
Play with this a little. Change the PORT setting to match you PIC

X	VAR	BYTE

Y	VAR	BYTE

X = 1



RAMPUP:

FOR Y = 0 TO 10

  HIGH PORTB.2

LOW PORTB.3

PAUSE X

LOW PORTB.2

HIGH PORTB.3

PAUSE X

NEXT Y

X = X + 10

IF X => 100 THEN RAMPDOWN

GOTO RAMPUP



RAMPDOWN:

FOR Y = 0 TO 10

  HIGH PORTB.2

LOW PORTB.3

PAUSE X

LOW PORTB.2

HIGH PORTB.3

PAUSE X

NEXT Y

X = X - 10

IF X =< 25 THEN RAMPUP

GOTO RAMPDOWN