Motor Stepper Example

[ScaleRobotics]

Hello Mel, Everyone,

I`d like to know how to get the code into the chip, (might sound silly), but it doesn`t seem to want to compile in any of the software.

What version of PicBasic Pro do you have? Melanie's example from post#1 seems to compile fine over here. I tried the 16F877.

You might also be interested in this microstepping example http://www.picbasic.co.uk/forum/cont...per-controller

and these: http://www.picbasic.co.uk/forum/content.php?r=39

[Nozapo]

What version of PicBasic Pro do you have? Melanie's example from post#1 seems to compile fine over here. I tried the 16F877.

You might also be interested in this microstepping example http://www.picbasic.co.uk/forum/cont...per-controller

and these: http://www.picbasic.co.uk/forum/content.php?r=39

Hi Scalerobotics,
Thanks for the other couple of links, I`ll have a look.
One of the latest versions, but see the attachment one screen capture of BasicPro & one from Picaxe compiler and their respective messages.

Note, I don`t have any headers etc. just copy pasted the code as is, oh, and with different port#`s, which hasn`t made any difference to the error messages.
In any case, the 16F877 isn`t any good to me, my requirements/specs are for a 14 pin Pic.
I`d have to reconfigure the code to suit again, so there`s Picaxe14M/2, 16F684, 16C505, 16F505, 16F676,etc, or if I`m not fussy, I can get really universal and put one of those AVR chips in if they`re easier to configure, that way both camps can enjoy (a balance in the force, perhaps ha,ha).

Thanks again

[mackrackit]

If you are not using Pic Basic Pro the examples from this forum will not work. Nor will they work for an AVR chip or picaxe.