Motor Stepper Example

Closed Thread
Results 1 to 40 of 135

Hybrid View

  1. - 8th March 2011, 01:12 #1
    thenew's Avatar
    thenew
    thenew is offline Junior Member
    Join Date
    Mar 2011
    Posts
    10

    Did you find this post helpful? Yes | No

    Default Re: Motor Stepper Example

    yes i connect the uln2803 to ground...

    should i put switch to MCLR? or just connect to 10K and +5v?

    it is ok to connect the 4.7k resistor directly to the supply and MCLR without switch?
    Last edited by thenew; - 8th March 2011 at 01:20.
  2. - 8th March 2011, 02:01 #2
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default Re: Motor Stepper Example

    Look at the example in the manual.
    Dave
    Always wear safety glasses while programming.
  3. - 8th March 2011, 12:30 #3
    thenew's Avatar
    thenew
    thenew is offline Junior Member
    Join Date
    Mar 2011
    Posts
    10

    Did you find this post helpful? Yes | No

    Default Re: Motor Stepper Example

    my previous problem solved..

    do you have an ides how to program using sensor as input? That when it is high something would activate then when it is low still activate.
« Previous Thread | Next Thread »

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules