This piece of code is wrong!
Al.Code:' Decrement minutes decmin: minute = minute - 1 If minute >= 60 Then minute = 59 hour = hour - 1 If hour >= 24 Then hour = 23 Endif Endif
|
This piece of code is wrong!
Al.Code:' Decrement minutes decmin: minute = minute - 1 If minute >= 60 Then minute = 59 hour = hour - 1 If hour >= 24 Then hour = 23 Endif Endif
All progress began with an idea
|
Not really...
if minutes was 0, if you decrement it and it's a BYTE, this will gives you...255... same apply to hour.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Hops... True! But using the overflow you don't need the "=" sign.
Al.
Last edited by aratti; - 13th November 2008 at 22:14.
All progress began with an idea
|
i have found out the problem. freqout and sound commant will delay my overall circuit function when display the result on the LCD screen.
then anyone have a solution can replace for freqout and sound??
Code:define LOADER_USED 1 define OSC 4 define LCD_DREG PORTB DEFINE LCD_DBIT 0 DEFINE LCD_RSREG PORTB DEFINE LCD_RSBIT 5 DEFINE LCD_EREG PORTB DEFINE LCD_EBIT 4 DEFINE LCD_BITS 4 adcon1 = 7 trisa = %11111111 hour var byte ' Define hour variable dhour var byte ' Define display hour variable minute var byte ' Define minute variable second var byte ' Define second variable ticks var byte ' Define pieces of seconds variable update var byte ' Define variable to indicate update of LCD i var byte ' Debounce loop variable cl var byte buf var byte(10) tagNum var byte idx var byte char var byte tag1 data "0010828978" @ device WDT_OFF CMCON = 7 ' PORTA digital Pause 100 ' Wait for LCD to startup hour = 00 ' Set initial time to 00:00:00 minute = 00 second = 00 ticks = 00 update = 1 ' Force first display ' Set TMR0 to interrupt every 16.384 milliseconds OPTION_REG = $55 ' Set TMR0 configuration and enable PORTB pullups INTCON = $a0 ' Enable TMR0 interrupts On Interrupt Goto tickint PORTB = 0 ' PORTB lines low to read buttons TRISB = %11001111 ' Enable buttons ' Main program loop - in this case, it only updates the LCD with the time mainloop: ' Check any button pressed to set time If PORTa.0 = 1 Then decmin If PORTA.1 = 1 Then incmin bbb: if porta.2 = 1 then nice ' Check for time to update screen chkup: If update = 1 Then Lcdout $fe,1 ' Clear screen 'lcdout $FE,$c0,"Next 12:10:00" ' Display time as hh:mm:ss dhour = hour ' Change hour 0 to 12 If (hour // 12) = 0 Then dhour = dhour + 12 Endif ' Check for AM or PM If hour < 12 Then Lcdout dec2 dhour, ":", dec2 minute, ":", dec2 second, " AM" Else Lcdout dec2 (dhour - 12), ":", dec2 minute, ":", dec2 second, " PM" Endif update = 0 ' Screen updated Endif lcdout $FE,$c0,"Next 12:10:10 AM" if (dhour = 12) and (minute = 10) and (second = 10) then aaa goto mainloop aaa: 'freqout porta.5,1000*/$100,115*/$100 sound porta.5, [200,100] lcdout $FE,1,"please" lcdout $FE,$c0,"Medicine!!" high portc.0 update = 1 'pause 2000 goto mainloop nice: high porta.3 low portc.0 'freqout porta.5,1000*/$100,115*/$100 high porta.3 'pause 3000 serin2 portc.7,84,[str buf\10] 'nextline: for tagnum = 1 to 2 for idx = 0 to 9 read(((tagnum-1)*10)+idx),char if(char<>buf(idx)) then goto bad_char next goto tag_correct bad_char: next bad_tag: low porta.3 'pause 500 high portc.0 tagnum = 0 lcdout $FE,1,"Sorry,Wrong" lcdout $FE,$c0,"Medicine!!" sound porta.5, [200,100] 'freqout porta.5,1000*/$100,115*/$100 'pause 3000 lcdout $FE,1,"Please Take" lcdout $FE,$c0,"Medicine A" goto nice tag_correct low porta.4 high porta.5 freqout porta.5,2000*/$100,880*/$100 lcdout $FE,1,"Correct take" lcdout $FE,$c0,"Medicine!!" high portc.3 pause 3000 goto mainloop 'Goto mainloop ' Do it all foreve ' Increment minutes incmin: minute = minute + 1 If minute >= 60 Then minute = 0 hour = hour + 1 If hour >= 24 Then hour = 0 Endif Endif Goto debounce ' Decrement minutes decmin: minute = minute - 1 If minute >= 60 Then minute = 59 hour = hour - 1 If hour >= 24 Then hour = 23 Endif Endif ' Debounce and delay for 250ms debounce: For i = 1 to 25 Pause 10 ' 10ms at a time so no interrupts are lost Next i update = 1 ' Set to update screen Goto chkup ' Interrupt routine to handle each timer tick disable ' Disable interrupts during interrupt handler tickint: ticks = ticks + 1 ' Count pieces of seconds If ticks < 61 Then tiexit ' 61 ticks per second (16.384ms per tick) ' One second elasped - update time ticks = 0 second = second + 1 If second >= 60 Then second = 0 minute = minute + 1 If minute >= 60 Then minute = 0 hour = hour + 1 If hour >= 24 Then hour = 0 Endif Endif Endif update = 1 ' Set to update LCD tiexit: INTCON.2 = 0 ' Reset timer interrupt flag Resume End
Last edited by sknee8787; - 14th November 2008 at 04:45.
|
Check out FREQOUT in the manual. It does not look correct the way you have it.
Dave
Always wear safety glasses while programming.
|
except FREQOUT and SOUND. have any different command is also for speaker?? While, after display out the result then pause 2000. it will delay the time to go for next stage. for example,
Code:nice: lcdout $FE,1,"Sorry,Wrong" lcdout $FE,$c0,"Medicine!!" freqout porta.5,1000*/$100,115*/$100 high porta.3 pause 3000 serin2 portc.7,84,[str buf\10] 'nextline: for tagnum = 1 to 2 for idx = 0 to 9 read(((tagnum-1)*10)+idx),char if(char<>buf(idx)) then goto bad_char
|
If I am doing my math correctly the above code is trying to produce a -256Hz tone for 1 second. I do not think this is possibleCode:freqout porta.5,1000*/$100,115*/$100
Try:
and see what happens.Code:FREQOUT PORTA.5,1000,440,350
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks