FREE Serial LCD Backpack Board


Closed Thread
Results 1 to 37 of 37

Hybrid View

  1. #1
    Join Date
    May 2007
    Posts
    604

    Default FREE Serial LCD Backpack Board

    • May be used with character LCD‘s with up to 4 lines.
    • Up to 20 characters per line are available.
    • Easy to use - simple Decimal commands.
    • Only 3 lines needed - 5V power, ground and signal input.
    • Compact size - 1.78in long by 0.98in wide.
    • Turn display ON/OFF remotely.
    • Automatic baud rate selection from 1,200 to 57,600. Standard RS-232 or TTL level signals.
    • Software controlled LED backlight, 255 brightness levels.


    You can download a data/instruction sheet here:
    http://home.earthlink.net/~rmteo/sit...les/dx-lcd.pdf

    I will be giving away 10 of these to members of this forum. You just have to pay for priority shipping (US$7 for USA, US$15 for International addresses).

    To qualify (and to avoid any confusion), you will have to do this:
    1. Send me a PM to say that you are interested. Also, please state whether you want 2x8 or 1x16 header on the board. I will reply with my PayPal info.
    2. Post a reply here with your name stating that you are interested and have sent me the PM.

    The first 10 names to post here will be receive the board. Good luck and thanks for your interest.

  2. #2
    Join Date
    Jun 2005
    Location
    Up the bush, Western Plains, NSW Au
    Posts
    216


    Did you find this post helpful? Yes | No

    Default

    Yes, interested.
    PM sent by the time you read this.
    Peter Moritz.
    Up the bush, Western Plains,
    New South Wales,
    Australia.

  3. #3
    Join Date
    Feb 2003
    Posts
    432


    Did you find this post helpful? Yes | No

    Default

    PM sent but forgot to say 16 pin header !!!

    Thanks

    Keith
    Keith

    www.diyha.co.uk
    www.kat5.tv

  4. #4
    Join Date
    Feb 2003
    Location
    Sydney, Australia
    Posts
    126


    Did you find this post helpful? Yes | No

    Default

    Just following up on the PM where we discussed the LCD board.
    bill.

  5. #5
    Join Date
    May 2007
    Posts
    604


    Did you find this post helpful? Yes | No

    Default

    Hi Bill,

    I do not recall your PM. Would you please refresh my memory please.

  6. #6
    Join Date
    May 2007
    Posts
    604


    Did you find this post helpful? Yes | No

    Default

    Sorry, I found your PM. Yes, I do have 2x8 as well 1x16.

  7. #7
    Join Date
    Nov 2008
    Posts
    4


    Did you find this post helpful? Yes | No

    Default Where is lcd board available For Sale & how much

    Where is lcd board available For Sale & how much does it cost
    Jerry

  8. #8
    Join Date
    May 2007
    Posts
    604


    Did you find this post helpful? Yes | No

    Default

    Jerry, I have extended the FREE offer to you. Check your PM. Let me know whether you want a 2x8 or 1x16.

  9. #9
    Join Date
    Oct 2008
    Location
    Ashland, KY
    Posts
    45


    Did you find this post helpful? Yes | No

    Default Arrrgh! I'm too late!

    Hello Rene-I'm sorry I missed this offer, but I haven't had much time to visit this forum within the past couple of weeks. If I were to purchase one of your GLCD units, what would the additional cost be to add one of these boards to the package? I should be here a bit more often for at least the next couple of weeks, so I'd appreciate it if you could reply back either here or if you could give me another call (if you still have my number)...

    I'm back to work and trying to cram in as many hours as I can before I start classes, so if you do call and I can't answer then I'm either busy working or stuck somewhere without service on my cell. Thanks for the great products and offers, and I'm looking forward to purchasing these products in the near future...
    Last edited by rxforspeed; - 29th November 2008 at 05:33. Reason: Signature was listed twice
    -Adam Collins

  10. #10
    Join Date
    Mar 2008
    Location
    Gerogetown, Texas
    Posts
    94


    Did you find this post helpful? Yes | No

    Default

    Rene

    I received the backpack. It works great. Thanks for the kind offer.

    Dave

  11. #11
    Join Date
    May 2007
    Posts
    604


    Did you find this post helpful? Yes | No

    Default

    Adam, if you get the GLCD, I will throw in the LCD backpack for free.

Similar Threads

  1. LCD serial backpacks
    By Archangel in forum Serial
    Replies: 67
    Last Post: - 30th December 2010, 04:51
  2. Please help with EDE702 - Serial to LCD interface
    By Tomexx in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 30th October 2008, 02:48
  3. Play with LCD on PICDEM
    By The IceMan in forum mel PIC BASIC
    Replies: 5
    Last Post: - 22nd August 2008, 16:56
  4. Serial LCD
    By Tobias in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 15th November 2007, 08:31
  5. Replies: 8
    Last Post: - 7th December 2006, 15:42

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts