Quote Originally Posted by Darrel Taylor View Post
Great, sounds like you're interested. So I should also say that there's NO programming to do on the PIC side.

If you can HSEROUT to a PC with a cable, then the same program will work with the MatchPort.

After installing the software on the PC, you just pull-up a web page with a browser to set the baud rate for the PIC and a few other options, then the device will automatically show up in the list of COM ports, in any PC program.

Couldn't be easier.
Unless they gave them out for free.

Or maybe if it came with a wireless router ... which you'll need (but probably already have).

DT
Hi Darrel

I have being reading your reply to this Bill ( Although its years old)
just wanted to know if there are now newer similar modules that are easy to use like those today.
i am thinking of adding this to a Data Logger project that has got serial data output so it can be read from anywhere
in the world .
A push in the right direction is needed here

Isaac