GOTO absolut address - is that possible?

[Ioannis]

Isn't necessary to change pages? As this is in assembly, PBP does not take care of this, I suppose.

Ioannis

[Darrel Taylor]

From another thread I saw he's using an 18F4550 with a USB bootloader.

So nope. No Pages to worry about.
<br>

[Acetronics2]

Hi, Darrel

While on that subject ...

I use, on a 16F88 :

' If program lost

@ ORG 4094			' Pointer to the end of program
@ CLRF PCLATH			' pointer in the right page ( lol )
@ GOTO INIT 			' It's gone for another round...
'
@ END

Works and compiles fine ... BUT

No way to use Breakpoints in MPSIM when lines not commented ...

Do you have any idea about that ??? ( µChip tells ... go and see Melabs !!! - as always ... )

Alain

[Archangel]

Hi, Darrel

While on that subject ...

I use, on a 16F88 :

' If program lost

@ ORG 4094			' Pointer to the end of program
@ CLRF PCLATH			' pointer in the right page ( lol )
@ GOTO INIT 			' It's gone for another round...
'
@ END

Works and compiles fine ... BUT

No way to use Breakpoints in MPSIM when lines not commented ...

Do you have any idea about that ??? ( µChip tells ... go and see Melabs !!! - as always ... )

Alain

Hi Alain, Just curious . . . ASM comment is ; not ' yes?

[Darrel Taylor]

Hi Alain, Just curious . . . ASM comment is ; not ' yes?

Way to go Joe!
I didn't even see that.

Can't imagine how it compiled.
<br>

[Archangel]

Thanks Darrel 30 years of snivel service teaches you to pick fly specks out of the pepper ELSE Nazi bosses frag your reputation.

[Acetronics2]

Hi Alain, Just curious . . . ASM comment is ; not ' yes?

Hi, joe

YES ... looks right, but compiles and runs fine.

After all, It's a PBP program ... intelligent compiler ? lol : might be.

In fact, MPLAB accept both " ; " and " ' " ... as MPLAB Editor is set to "Basic" mode. Why not use what computers offer for ease of work ( Humour ...)

Changing " ' " to " ; " do not change anything ...

You're quite right : Manual says " line is sent verbatim" ... but, obviously, comments are not sent !!!


Alain

[Archangel]

Hi, joe

YES ... looks right, but compiles and runs fine.

After all, It's a PBP program ... intelligent compiler ? lol : might be.

In fact, MPLAB accept both " ; " and " ' " ... as MPLAB Editor is set to "Basic" mode. Why not use what computers offer for ease of work ( Humour ...)

Changing " ' " to " ; " do not change anything ...

You're quite right : Manual says " line is sent verbatim" ... but, obviously, comments are not sent !!!


Alain

Ask questions and learn, Right? <br>PBP & Assembler, like mixing 10 oz alcohol and 10 oz water, you do not get 20 oz of liquid.
I read books AND this forum, sometimes experience and books do not agree. Anyway I try to help and am not embarrassed to learn from the masters.

[Acetronics2]

Hi,

Here is the Melabs answer :

Below is the response that I received from MicroEngineering Labs regarding your issue:

I've found that the problem only occurs when the assembly-language jump to our INIT routine is included:

@ GOTO INIT

I'm guessing that since the INIT label isn't a label in the program source code (it is an internal label PBP creates), it is not something that can be resolved for source-level debugging.

User code should not jump to our INIT routine. If he wants to restart his program, he should declare a label in the source and use it instead.

Charles Leo
microEngineering Labs, Inc.

... now just have to find WHERE to place this "dummy" label ...

ring you asap.

Alain