GROUND plane or nor GROUND plane

Results 1 to 26 of 26

Threaded View

  1. - 5th November 2008, 22:40 #2
    Bruce's Avatar
    Bruce
    Bruce is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,405

    Did you find this post helpful? Yes | No

    Default

    I always include a ground plane with the bottom layer solid copper, and each ground connection from the upper layer connected directly to the plane.

    Attached is an example of an RF transmitter board. The lower layer is all copper connected to ground.
    Attached Images Attached Images  
    Last edited by Bruce; - 5th November 2008 at 22:50. Reason: Example screen capture of ground plane
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com
« Previous Thread | Next Thread »

Similar Threads

  1. A PIC logic 0V output is not equal to a ground?
    By HankMcSpank in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 17th November 2009, 18:47
  2. Connecting circuit ground to mains ground
    By The Master in forum Off Topic
    Replies: 2
    Last Post: - 12th November 2009, 22:02
  3. Etching and ground planes
    By DavyJones in forum Schematics
    Replies: 6
    Last Post: - 9th April 2009, 18:16
  4. Negative Numbers/Virtual Ground
    By scottl in forum General
    Replies: 1
    Last Post: - 7th May 2006, 21:35

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules