It might be overkill, but I like ADS1246.
You can use shiftout/shiftin
EDIT:
This might be more suitable for you...
Type: Posts; User: pedja089; Keyword(s):
It might be overkill, but I like ADS1246.
You can use shiftout/shiftin
EDIT:
This might be more suitable for you...
As far as I understand it, it's just like GPRS.... You need sim, server to connect etc...
Difference to GPRS is just bandwith, power etc.
I got red circle on first try.
I noticed if html code is long, it will just stop generating it. Sometimes i can get to continue, sometimes not...
Now that you put in that words, it is exactly what I had on my mind.
Also I tried to make some html with svg graphic. When I asked to generate SVG it told me it cant, then I asked how to implement...
I have tried to get it to explain me about cc1101, and how to use it...
Code that is generated need lot of syntax correcting. But it generate every function, and explain every register i asked...
All good now...
Thank you.
Now fails here
For SDC_timeout1.lowbyte = $ff To 0 Step -1
SDC_sector_addr = 0 : Gosub SectorRead ' Long SDC_sector_addr is the sector to read. Returns Byte SDC_status.
If (SDC_status =...
I think $72. I'll check later.
But that is way they do it... I'm not familiar at all with anything regarding SD.
I was hoping that I could just use module as is...
First I edited my project from...
I have 2 SD cards 2GB and 16GB, both formated as FAT32. 2GB works fine, 16 fails initialization.
It fails to select FAT32
Select Case (DISK_buffer[450])
Case $01
DISK_type = FAT12 :...
Main issue is that this is just side project, and I do not have too much time to play with it, and learn every bit of it.
I was mostly hoping, that worst case would be to rewrite some arduino lib...
HenrikOlsson
Yes I have instaled it, but not manage to have sucess with it.
Richard
It's not critical. I found someone on upwork. So we will see.
Thanks to anyone. I'll post did I he make it...
Not fixed, just to get it started.
Board are soldered. I have SPI comm working. From examples from forum.
I stuck at CC1101 setup. Basicly just tried some Rx Tx on two board. But no luck...
I...
Chrome, Brave same.... But not every time...
More info:
https://www.upwork.com/jobs/~01f34aa6dec1166403
Try to increase delays with defines
' Set command delay time in us
DEFINE LCD_COMMANDUS 1500
' Set data delay time in us
DEFINE LCD_DATAUS 44
Try
PORTD.4=A.0
PORTD.5=A.1
PORTD.6=A.2
PORTD.7=A.3
Another way
PORTD=A>>4
I think you can find some info in this series:
https://www.youtube.com/watch?v=wdgULBpRoXk
https://www.youtube.com/watch?v=2lPzTU-3ONI
Look for nkey roll over descriptor...
Along buffer size, you need to change in hid_desc.bas:
ReportDescriptor1
retlw 0x05
retlw 0x01 ; usage page (generic desktop)
retlw 0x09
retlw 0x06 ; usage (keyboard)...
It is not so easy to change buffer. You must change descriptor file, not just length(If I understand usb correctly).
You can send one letter and modifier key at time.
Use this
For i = 0...
I used it on win7, and if I remember correctly on XP. It should work on win10.
You have keys.PBP, with all defined keys, also in .doc document you have codes.
Also USBSERVICE should be called...
I made keyboard to use as shortcuts for EAGLE. Should be exactly what you need. I used it on easypic dev board. Pic should be 18F4550.
Here is complete project 9108
I created that using many...
You don't have comma after = when sending from PIC.
In serial comm you have =,
Anyway I think correct syntax is AT+CPBW=1,"+22222222222" for writing to location 1.
You should be using HS. Try it...
You can try this:
Hx711Cnt var Word
I var Byte
GraM var word
GraMM var word
SigN var byte
Symbol dataa = PORTB.2
Same here :confused: