Printable View
I can't get this PIC to SLEEP with the following program:
CMCON = %00000111
TRISIO = %001100
OPTION_REG = %01000000
PIR1 = 0
GPIO = 0
@ DEVICE MCLR_OFF, INTRC_OSC, WDT_OFF, BOD_OFF, PWRT_OFF, PROTECT_OFF
'GPIO.0 =
'GPIO.1 = LED HIGH OUT
'GPIO.2 = SWITCH HIGH INPUT
'GPIO.3 = MCLR TIED HIGH
'GPIO.4 =
'GPIO.5 =
GPIO.1 = 1
PAUSE 100
INTCON = %00000000
FLAGS = 0
@SLEEP
GPIO.1 = 0
The LED goes on briefly, and then turns off. If it really does go to SLEEP, then something is waking it up. Help please!
Nevermind! GPIO.2 was tied high due to a wiring error. Datasheet says this will interrupt SLEEP, regardless of INTCON settings. Works O.K. now.
O.K., I give up. The name of this thread should be 12f629 wakes up unexpectedly. Here is the latest code:
CMCON = %00000111
TRISIO = %001100
OPTION_REG = %10000000
PIR1 = 0
GPIO = $000000
@ DEVICE MCLR_OFF, INTRC_OSC, WDT_OFF, BOD_OFF, PWRT_ON, PROTECT_OFF
'GPIO.0 =
'GPIO.1 = LED HIGH OUT
'GPIO.2 = SWITCH HIGH INPUT
'GPIO.3 = MCLR TIED HIGH
'GPIO.4 =
'GPIO.5 =
GPIO.1 = 1
PAUSE 100
INTCON = %00000000
FLAGS = 0
@SLEEP
NOP
GPIO.1 = 0
I have checked all pins with a scope, added decoupling capacitors on the +5 volt and MCLR pins, and the result is always the same. If the last line of the program is present, the LED goes out. So clearly something is causing the PIC to wakeup. What am I missing?
Is my problem so stupid that no one will give me suggestions? I believe I have read everything, and tried many things. Please help. Thank you.
Put a space between @ and SLEEP.
Edit: I guess this bears a little more detail. What happens is by placing @SLEEP in
there it doesn't generate code for SLEEP, so you land on the next valid instruction
which would be your GPIO.1 = 0.
You don't have the @ symbol before your NOP either, so PBP creates a lable instead
of code for the NOP. @ NOP would be the correct way to insert an assembly NOP
instruction.
Might just be only BRUCE saw the problem.Quote:
Originally Posted by jderson
Thank you Bruce and Joe! The space solved the problem. Staring me in the face all along!
well, that explains why i couldn't get a pic to sleep either. lol