Printable View
Any idea why I'm having a fuse problem ?
@ __config _INTRC_OSC_NOCLKOUT & _WDT_ON & _MCLRE_OFF & _LVP_OFF
' & _PROTECT_OFF & _PWRT_ON & _BOD_ON & _CPD_OFF
compiles with no problem but as soon as I add any of the four commented fuses onto the line I get a compiler error
"Error [113] Symbol not previously defined."
These are the symbols I got out of the PBP Inc folder file M16F62XA. I'm using Microcode Studio, MPASM and I have the device selected as 16F628A
thanks, Andrew
There is your choices:Code:
_BODEN_ON EQU H'3FFF' ;Backwards compatability to 16F62X
_BODEN_OFF EQU H'3FBF' ;Backwards compatability to 16F62X
_BOREN_ON EQU H'3FFF'
_BOREN_OFF EQU H'3FBF'
_CP_ON EQU H'1FFF'
_CP_OFF EQU H'3FFF'
_DATA_CP_ON EQU H'3EFF'
_DATA_CP_OFF EQU H'3FFF'
_PWRTE_OFF EQU H'3FFF'
_PWRTE_ON EQU H'3FF7'
_WDT_ON EQU H'3FFF'
_WDT_OFF EQU H'3FFB'
_LVP_ON EQU H'3FFF'
_LVP_OFF EQU H'3F7F'
_MCLRE_ON EQU H'3FFF'
_MCLRE_OFF EQU H'3FDF'
_RC_OSC_CLKOUT EQU H'3FFF'
_RC_OSC_NOCLKOUT EQU H'3FFE'
_ER_OSC_CLKOUT EQU H'3FFF' ;Backwards compatability to 16F62X
_ER_OSC_NOCLKOUT EQU H'3FFE' ;Backwards compatability to 16F62X
_INTOSC_OSC_CLKOUT EQU H'3FFD'
_INTOSC_OSC_NOCLKOUT EQU H'3FFC'
_INTRC_OSC_CLKOUT EQU H'3FFD' ;Backwards compatability to 16F62X
_INTRC_OSC_NOCLKOUT EQU H'3FFC' ;Backwards compatability to 16F62X
_EXTCLK_OSC EQU H'3FEF'
_HS_OSC EQU H'3FEE'
_XT_OSC EQU H'3FED'
_LP_OSC EQU H'3FEC'
PWRTE NOT PWRT, CP_OFF NOT PROTECT,BODEN or BOREN , NOT BOD, DATA_CP not CPD. You must make them all on 1 line or do it the way I show below, (Thanks Darrel ).
Code:@MyConfig = _HS_OSC & _WDT_OFF & _PWRTE_ON & _LVP_OFF
@MyConfig = MyConfig & _BODEN_OFF
@ __config MyConfig
If you're using MPASM, you won't be using the M16F62XA file from the INC folder of PBP. You'll be 'using' the .INC file from the MPASM Suite directory.Quote:
Originally Posted by AndrewC
Duh :(
Thankyou :)