Printable View
Hi Everyone,
I am using 18F4550 in my projects and I use USB CDC and HID. Everything is ok. Now I need to make an USB mass storage with 18F4550. Is it possible? Somebody can help? Where I start? I intend to use the Crownhill Basic because everything that I developed was in Basic.
I know that I dont need any change in my hardware, Iam using 18F4550 20 Mhz. I need to insert some especial program?driver?
Thank you in advance
Wagner
No...
The PIC's are not USB hosts (well, there are a couple of PICs on the horizon that'll do the USB OTG thing, but not quite here yet). A PIC is a peripheral, a slave.
There are a couple of interface chips out there to put in between a PIC and a USB device.
And what is this "Crownhill Basic" you speak of?
Hi skimask,Quote:
Originally Posted by skimask
I know that PIC is a slave and I dont want the PIC like host, I want the pic runs like a Mass storage. I means that I want the PIC like an USB FLASH DRIVER. I have a project that I need to download the datas to the PC, but I dont want to send the data in the CDC or HID keyboard I would like to send like a USB Digital Camera or USB FLASH DRIVER. DO you understand what I means?
When I said "Crownhill Basic" I means that I am using PIC BASIC from Crownhill Associates. I like very much this Basic. It is very good system to development.
Thank you very much
Wagner
So you want to turn your PIC into a STICK?Quote:
Originally Posted by wagner
Right...that would most likely be...which one?!Quote:
When I said "Crownhill Basic" I means that I am using PIC BASIC from Crownhill Associates. I like very much this Basic. It is very good system to development.
Crownhill resells a couple of 'brands' of PIC basic...
So again, which one is it?
Who wrote the software that Crownhill resells?
And how much other PIC programming have you done?
And in case you forget your own questions and, more importantly, the answers you have been given...read THIS thread!
http://www.picbasic.co.uk/forum/showthread.php?t=9144
Yes, I want to turn my PIC in a Stick.Quote:
Originally Posted by skimask
I am using the Development Suite Proton version 3.1 July 2005. The company that I work bought direct from Crownhill in the web site. But thi is not problem to me. This Development suite is working very good. What I need is some example to interface my pic to PC like a stick and I want this program in PIC BASIC.
Thank you
Wagner
Hi,Quote:
Originally Posted by skimask
About the thread above,(http://www.picbasic.co.uk/forum/showthread.php?t=9144) I solved myseft this problem. Thank you. I change the program and ok. Now I open a new thread about "I need to interface my PIC with the PC like Stick."
Thank you
First off, you might want to think about going to the right forums...Quote:
Originally Posted by wagner
Nobody (well, not a lot of people) here in these forums uses the 'Proton Development System'.
Proton Basic <> PicBasicPro
i.e. Proton Basic 'does not equal' PicBasicPro
i.e. Proton Basic is different than PicBasicPro
i.e. Proton Basic isn't the same as PicBasicPro
i.e. The Proton Development System doesn't use the PicBasicPro compiler
Anything clicking yet?
http://www.picbasic.co.uk/forum/showthread.php?t=9144
Ok,Quote:
Originally Posted by skimask
Sorry. I am looking for a right forum. I am sorry.
Wagner
Lol, you guys are gas!