Printable View
Hello,
Does someone know what is the meaning of the error message:
102: code crosses boundary @800h
although the code compiles fine. I should have enough program memory so why this warning?
One more thing, CMCON0 is not recognized with a PIC16F690 while is is fine with 16F684, why is that?
Always worthwhile to do a search ;)
Warning (and other Compilation Error) Messages
http://www.picbasic.co.uk/forum/showthread.php?t=555&
and this
http://www.picbasic.co.uk/forum/show...02&postcount=1
and finally.... you may discover that you can disable it in MicroCode Studio
And download/read the PIC datasheet to discover why CMCON0 is not recognized. Table 8-2 should give you some reasons ;)
just a warning it's ok. When you do a search on this statement here on this forum you will find this question with answers a few hunderd times. :)
Wheb you read the datasheet of this component you see that there is no cmcon register.
okay. no cmcon0 register but cm0con0 and cm1con0 register where i neeed to clear bit 7 for both.
i should read the datadheet for the 16f690 and not assume it has t e same specs as 16f684.
thanks.