Printable View
( thanks MELANIE for reponse at last thread)
I will want your opinion by looking at the following config, to say to me if SHIFTOUT can be appropriate thank you
please see this two links
http://f6ggy.dyndns.org/temp/img014.gif
http://f6ggy.dyndns.org/temp/img010.gif
Yes, you are correct that SHIFTOUT is the PBP command to use.
Example...
DataPin var PortA.0
ClockPin var PortA.1
SW var Byte
N var Word
A var Byte
To output the correct 19-bit sequence you could execute...
ShiftOUT DataPin,ClockPin,1,[SW\2,N\10,A\7]
or use the three individual lines as shown in img010.gif.
Also regarding img010.gif, there's no point in having variables SW and A as words if they're never going to be bigger than 2 and 7 bits each respectively.
Melanie