PIC 16F628 geting sinuous impuls

Dear professionals and amateurs,

I want to use PIC16F628 for an inverter. I need to get sinuous impulse on a pin of course if it is possible or to get +phase and –phase on two pins in order to drive MOSFETS and to get signal shape as similar as possible to the signal of electrical power of 50Hz/60Hz we are using at home. Of course signal from the MOSFETS with go through TRANSFORMER in order to get 220V/110V…

Do any of you know how to program this in PIC BASIC

Thanks in advance

Quote:

---

Originally Posted by Robinzon Kruso

I need to get sinuous impulse on a pin of course if it is possible

---

Read the datasheet on the '628. Good luck getting analog anything (except maybe a window comparator) on the '628.
And if you do a bit of searching, you'll find a big long huge thread here that talks all about power inverters.