Why does this fall through?
loop:
IF porta.0 = 1 then loop
next lot of basic code follows here
RA0 is tied up via 10K and a press button grounds it, to get out of the loop, but...it fall thro anyway
Rgds
Mike URGENT for my sanity
Printable View
Why does this fall through?
loop:
IF porta.0 = 1 then loop
next lot of basic code follows here
RA0 is tied up via 10K and a press button grounds it, to get out of the loop, but...it fall thro anyway
Rgds
Mike URGENT for my sanity
Think analog...Quote:
Originally Posted by med2007
Think datasheets...
Think about telling which PIC you're using...
Just a few things to think about...
And also your configurations, DEFINES, schematic, etc.
Why don't you post your code? If you seek help from experts, then do not worry about stealing you code... They sure know and do better!
With no infos, only guesses can be made. And I am not good at. If I was I would have won the Lotto or Casino or something anyway...
Ioannis
Thanks guys, the answer is to configure porta for digital I/O, which I hadn't done.
CMCON = %00000111 using 16F628
Rgds