Printable View
Hi,
I want to make a sound sensitive switch with a PIC. It needs to have variable sensitivity.
What i'm thinking is, use a PIC with a AD converter, and compare the AD reading against the currently set sensitivity variable.
What i'm not sure about is how to connect the microphone. Connecting the mic directly to an I/O pin surely wont work. I'm assuming i'd need some kind of amplification, but I have no idea where to start.
Does any1 have any ideas?
This looks like it might work.
If you're using an electret microphone.
http://www.alanmacek.com/usb/
Look at the schematic near the bottom.
<br>
Hi Kamikaze,
If you want to consider another circuit, goto www.aaroncake.net/circuits and search for SOUND LEVEL METER. Where the input to the bar graph is you could feed that into a PIC analog pin and go from there.
There are many published articles for what you want to do but I think after looking at Darrel's and mine you should be able to accomplish what you are looking to do.
Did you get your other LCD project going? I was referring to using a serial LCD. Sparkfun has one very reasonably priced and very easy to work with.
HTH,
BobK
Thanks Darrel and BobK. I'll have a look at both of those now, and i'm sure i'll work it out.
I got the LCD going. In the end i opted the easy way out and went with an 18-pin PIC instead of the 8-pin i wanted to use - Mainly to minimize the physical size of the circuit.
Hi,
See page 7 of this application note.
AVR335: Digital Sound Recorder with AVR® and DataFlash®
http://www.atmel.com/dyn/resources/p...ts/doc1456.pdf
Best regards,
Luciano