Writing User ID

How do I write to the User ID memory locations (2000h-2003h) on a PIC 12F683? Poke, PokeCode, Write, and WriteCode don't seem to be the answer. Do I need to insert assembly code in the PBP code?

it's a special register, I access it through my programmer.

place those line at the end of your code

Code:

---

asm
        errorlevel -220
        org 0x2000
        dw 0,1,2,3
       
endasm

---

you should have
ID0 = 00
ID1 = 01
ID2 = 02
ID3 = 03

Probably there's a much more elegant way to do it... seems to work here

deuhhh, yes there's an easier way.... Always nice to read MPASM PDF

Code:

---

@        __IDLOCS 0x1234

---

Neat, easy, and it works!

EDIT:But seems the previous allow much possibility...you could set 1A, 1B, 1C, 1D.. not with the second.. or i overlooked something... as usual ;)

And for the crowd that doesn't use MPASM ...
A shrinking crowd, but still a crowd.

This is from PM.TXT

Code:

---

8.2. ID
     
      ID  Expr
      ID  String
      ID  CHECKSUM

Each PICmicro MCU has a 16-bit (12-bit core) or 28-bit (14-bit core) ID.
This value can be set in one of three methods. A numeric expression or
string constant can be used for either core type. For 12-bit cores only,
the reserved word CHECKSUM may be used. This forces some PICmicro MCU
programmers to compute the checksum of the PICmicro MCU code space.

---

Edit: Put an @ and a space in front of it