Using PBP 2.45, Microcode Sudio, and 18f242-I/sp at 20mhz I have not been able to get the program to move to a label after time out. The program appears to get to the Serin2 command and stop at the Wait command. Any suggestions?
Thanks
Printable View
Using PBP 2.45, Microcode Sudio, and 18f242-I/sp at 20mhz I have not been able to get the program to move to a label after time out. The program appears to get to the Serin2 command and stop at the Wait command. Any suggestions?
Thanks
The timeout/label option is useless if you have noise on the serial input
pin.
Even a quick blip on this pin will cause the timeout to reset.