SEROUT problem

Hello,

There is the code that I used for testing communication between PIC16F84A and RS232 computer port :
---------------
include "modedefs.bas"
define CHAR_PACING 1000
define OSC 8

here: serout porta.1,T9600,["Hello"]
serout porta.1,T9600,[" MartiN "]
goto here
---------------
For the moment I just want to send information to the serial port. When I used this code I'm not able to see the message "Hello Martin " on the computer port.

I've try with and without CHAR_PACING and I've try many other mode like T1200, T2400 and does not seems to work. I see only garbadge on the port.

My oscillator (HS mode) is a 8MHz xtal with 22uF Cap.

The connection between DB9 port and Pic is a 1K resistor as described in the PBP documentation for SEROUT command.

someone can help me to read the good character on the serial port???

thanks!!

Hi Martin, try N9600 then it should work.
T is used when you have a RS232 driver which invert the signal.


Brgds Roy SM0MKJ

Hello Roy,

I've just test it and it works very well!

Thanks for your help.