Printable View
Hi,
I ever use internal osc, is there any special consideration (hardware or software) in use a PIC12F675 with a external Xtal?
I'm using a propic2 programmer and IC-Prog 1.05D (XT oscillator) to burn the PIC.
I've tried all combinations I Knew without success.
Can anyone help me with this ?
MHHHHHHH ...
10 Mhz needs HS Setting Oscillator ... first of all !
Alain
One thing to check is the value of capacitors used with the 10 Mhz crystal. Page 53 of the datasheet states a value of 15-30 pF. Generally I use 22pf for most of my PIC projects when using external crystals.
As Alain stated, using a 10Mhz crystal requires HS setting and not XT
I tried to use HS as external oscillator and connected 22 pF caps, but still it didn't work.
Is there any other setup to do in IC-Prog or other hardware recomendation?
Tks
Did you defined the HS osc mode in your code?
http://www.picbasic.co.uk/forum/showthread.php?t=543Code:@ __CONFIG _HS_OSC & _WDT_OFF & _PWRTE_ON & _MCLRE_OFF & _BODEN_ON
DEFINE OSC 8
I don't know if IC-PROG program automatically those config fuses setting, but in their Command menu they have a Program Config (F4) option.
Hi,ewand
Did you check the clock w/ a scope ( 1/10 probe !!! ) on its output pin ???
... just a thought ...
Alain