Port Values

Hi,

I have a simple Question,but I can not find a Answer.
I have a Pic 16F870 And I want to use My PortC as High/Low,I now how to do this but can I do this like here:

Data @1,3,6,12,9

For Counter = 1 to 4
Read Counter,State

PortC = State
Gosub DelayCheck

Next Counter


3 is PortC = %00000011 and 6 is PortC = %00000110 and so on.

Can I do this.

Thanks.

Sure you can do this, but don't forget to set the TRISC register at the top of your code to configure your i/o as output.

Code:

---

TRISC=0 ' configure all PORTC I/Os to output
    '
    '
    '
    '
PORTC=%00001010 ' Write to PORTC

---

Hi,
Thanks Mister,
I can use decimal numbers like here PortC=3 and this don't disturbe my Hserin Communication on PortC.?!

Thanks.

Mmm, interesting point, i've never think about it.

A simple experimentation here reveal that it doesn't cause ANY problem as long as you did a HSEROUT before writing to PORTC. Once you did it, those RX and TX I/Os are dedicated to HSERIN/HSEROUT only.

i tried...

Code:

---

    '
    '    Pic Configuration
    '    =================
    @ __CONFIG _XT_OSC & _WDT_ON & _PWRTE_ON & _BODEN_ON & _LVP_OFF                 
        ' XT (4Mhz) oscillator
        ' Enable watch dog timer
        ' Enable power up timer
        ' Enable brown out detect
        ' Disable low voltage programming
           
    '
    '    Hardware configuration
    '    ======================
    TRISC=%10000000 ' PORTC.7 as input => USART RX,
                    ' Others as output

    '
    '    Serial Communication definition
    '    ===============================
    DEFINE HSER_RCSTA 90h ' Enable serial port & continuous receive
    DEFINE HSER_TXSTA 24h ' Enable transmit, BRGH = 1
    DEFINE HSER_SPBRG 25  ' 9600 Baud @4MHz, 0.16%
    DEFINE HSER_CLROERR 1 ' Clear overflow automatically

    ' 
    '    Variables definition
    '    ===================
    CounterA    var byte

    '
    '    Main program
    '    ============
    HSEROUT [0]
Start:
    PORTC=%11111111
    PAUSE 500
    PORTC=0
    PAUSE 500
    GOTO START

---

If you use it, you'll discover that nothing happen to PORTC.6 and PORTC.7... well they stay at their usual levels... High.

Now a slight better test...

Code:

---

Start:
    HSEROUT ["Send me data...",13,10]
    hserin [DEC Countera]
    PORTC=countera
    GOTO START

---

Use MicroCode Serial Communicator to do you Tests... it still work

Yes its Working!

I forgot this TRISC=0 :-)

Thanks Mister