Which pic has a big flash program memory?

Hi,
i have written a program about 1000 lines and it's hex file is more than 4k so i can't use 16F873A but i use 16F877A.so i have these two questions:
1- if my program is being more than 8K what should i do?

2- i used 16F877A instead of 16F873A. but i just need 28 pin micro so i have
alot of extra pin.so it is effect on the cost of the project because an engineer should do the project with less cost.so whould i do for this?

Quote:

---

Originally Posted by amindzo

Hi,...and it's hex file is more than 4k so i can't use 16F873A but i use 16F877A.so i have these two questions:
1- if my program is being more than 8K what should i do?...

---

Are you using PBP and Code Studio?
If yes, how many "words" do you get when you compile your code?
Remember that the "words used" changes from PIC to PIC.

If you compile a code for 16F873A, you get say 200 words, but you may get more if you compile the exact same code for 16F877A.

Thus, you should not look at the size of the HEX file, but the "words used".


---------------------------

Start Here. Take your pick. Quite a few (28) in the 96K-128K range. Not so many (11) in the 128K-256K range. To get a large program memory size, you will need to go with an 18 series pic. Use can use the parametric search features to get the pin count/memory size/feature set you desire.

Steve

amindzo, Look at using an 18F252 then in the future you can upgrade to an 18F2620....

Dave Purola,
N8NTA

Hi,
i use micro code studio picbasic2.41.
my program was about 6355 word.