Proteus Execute Error

I create project drilve GLCD use picbasicpro compile asm file and put to proteus 6.7 after i run it show this Error.
This Error is because source code or proteus 6.9 ?
can you help me for fix this error?

Thankyou

It seems you are having an issue with Proteus configuration. Your code has been compiled succesfully.

So for sure, it is not about your code.

Hi Friend,

Is the "RV1" (in your circuit) a potentiometer or something like that ?
please, check if the RV1 component you´re using has a spice model for the simulation. Sometimes you can put the componnent in your design but it doesn´t have a spice model...

regards.

Sérgio

Thank you for help

I can fix that error but now i found New error in simulate program
after I buil program and Load Myprogram.Hex to MCU and Select Execute
It not happen CPU load is 0%. How to fix this Error?

Please help thank You.

Have you tried asking on the Proteus Support Forum ?

http://support.labcenter.co.uk/forum/

Labcenter staff are always on the board so you should get an answer pretty quickly. Although I have been using Proteus since V4.6 I have never used the simulation features. I just use if for ISIS (Schematic) and ARES (PCB Layout). You really need to ask on the proper forum as projects sometimes cant be loaded if they were created in a newer version of Proteus and I am running 6.3 SP2 but the current version is 6.9

Your problem seems to be a Proteus one rather than PicBasic.