18F2550 Compile problem

I trie to compile the example program, USBCDC but i get the following error:

Warning[230]c:\pbp\18f2550.inc 20: __CONFIG has been deprected for PIC18 devices. Use directive CONFIG.

Can anybody tell me what to do?

Hi,
First of all you need to use MPASM for the 18X series, so switch to that if you haven't allready. Then have a look here:

http://www.picbasic.co.uk/forum/showthread.php?t=543

Specificly the post from Steve (mister_e) on 29th october -05.

The latest version of PBP (2.47) hides that warning but I think it's best to get used to the new way Microchip wants it.

Hope it helps!
/Henrik Olsson.

This is not an error, just a warning.

Quote:

---

Originally Posted by NL2TTL

I trie to compile the example program, USBCDC but i get the following error:

Warning[230]c:\pbp\18f2550.inc 20: __CONFIG has been deprected for PIC18 devices. Use directive CONFIG.

Can anybody tell me what to do?

---

Its not an ERROR otherwise it would say "Error".

Its a WARNING that the syntax you are using to declare the configuration has been superceeded by a "new improved" version.

At the moment both methods work but in a later version of the assembler your declaration may no longer be supported.

There are several threads covering the topic.

http://www.picbasic.co.uk/forum/showthread.php?t=543

http://www.picbasic.co.uk/forum/showthread.php?t=4381

http://www.picbasic.co.uk/forum/showthread.php?t=3943

Hope that helps

After a few modification on the include file the pic is up and running again.
Thank you all