18F2550 config fuses, is my setup OK?

After reading Melanie fuses thread and some posts by Bruce for the 18f4550 im pretty sure this modification to the 18f2550.inc file in pbp subdir should work, I want to run the program at 4mhz with the internal oscillator, all ports digital, no clock out, no brown out detection and my app is not USB related, please correct me if Im wrong:

Code:

---

;****************************************
;* PBP's  18F2550.INC / Modified by (PEU)
;****************************************

                NOLIST
    ifdef PM_USED
        LIST
        "Error: PM does not support this device.  Use MPASM."
        NOLIST
    else
        LIST
        LIST p = 18F2550, r = dec, w = -311, f = inhx32
        INCLUDE "P18F2550.INC"        ; MPASM  Header
    __CONFIG    _CONFIG1L, _PLLDIV_1_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_1_1L
    __CONFIG    _CONFIG1H, _FOSC_INTOSCIO_EC_1H
    __CONFIG    _CONFIG2L, _BOR_OFF_2L
    __CONFIG    _CONFIG2H, _WDT_ON_2H & _WDTPS_1_2H
    __CONFIG    _CONFIG3H, _MCLRE_ON_3H & _PBADEN_OFF_3H & _LPT1OSC_ON_3H
    __CONFIG    _CONFIG4L, _LVP_OFF_4L & _ICPRT_OFF_4L & _XINST_OFF_4L
        NOLIST
    endif
        LIST
EEPROM_START        EQU        0F00000h
BLOCK_SIZE        EQU        32

---

Thanks in advance!

Pablo