Cable Length Between Micros

Hi all,

I am working on a project that requires using (2) 18F452 micros communicating between themselves using Serin and Serout commands. I will be using 24 gauge-shielded wire for the communication connections. What is the recommended maximum length of wire between (2) micros?

Thanks,
Mark

I have read that serial cables should not be longer than 100 feet. I have read 5 volt serial data at fifty feet with cat5e. Hope this helps.

travin

Thanks.

Mark

Hi Mark,

RS485 is easy to implement, pretty much like a serial port, and can go up to 4000 feet on a pair of wires. Do a search on this site for RS485 and also on Google and you should be overwhelmed with information. www.Parallax.com has a tutorial for using RS485 chips with the Basic Stamp which is a PIC chip in disguise.

BobK

I'll check it out. Thanks!

Mark

Point-to-Point 2km for proper RS232 and that's without line extenders...

Quote:

---

Originally Posted by Melanie

Point-to-Point 2km for proper RS232 and that's without line extenders...

---

Quote:

---

Originally Posted by BobK

...and can go up to 4000 feet on a pair of wires...

---

Are you guys (and girls) saying that we can put 2000meters of RS232 cable between two PICs and expect them to see each other on the line?

-------------

At proper RS-232 levels (not at logic levels) yes. If you use unshielded CAT5 cable then a little less. If you want more, use a line extender.