Problem using Instant Interrupts

Hello

I have downloaded the Instant interrupts example files and trying to compile them with no luck. Perhaps Darrell / Tim can enlighten me as to how to get it going?

This is the file I am trying to get to work.

Code:

---

INCLUDE "DT_INTS-14.bas"
INCLUDE "ReEnterPBP.bas"
INCLUDE "Elapsed_INT.bas"  ; Elapsed Timer Routines

ASM
INT_LIST  macro    ; IntSource,        Label,  Type, ResetFlag?
        INT_Handler  TMR1_INT,  _ClockCount,  PBP,  yes
    endm
    INT_CREATE            ; Creates the interrupt processor

    INT_ENABLE  TMR1_INT  ; Enable Timer 1 Interrupts 
ENDASM

GOSUB ResetTime          ' Reset Time to  0d-00:00:00.00
GOSUB StartTimer          ' Start the Elapsed Timer

Main:
  IF SecondsChanged = 1 THEN 
    SecondsChanged = 0
    LCDOUT $FE,2, DEC Days,"d-",DEC2 Hours,":",DEC2 Minutes,":",DEC2 Seconds
  ENDIF
GOTO Main

---

This is the error I see (from the .lst file)

Code:

---

  617                                        INT_LIST  macro    ; IntSource,        Label,  Type, ResetFlag?
  618                                                INT_Handler  TMR1_INT,  _ClockCount,  PBP,  yes
  619                                            endm
  620                                            INT_CREATE            ; Creates the interrupt processor
    +        019F- 29B8                            goto  @@0000
    +        01A0- 0804                            movf      FSR,W        ; 7 move FSR reg to be saved into W reg
    +        01A1- 00B6                            movwf    fsave        ; 8 save FSR reg to a bank 0 register
    +        01A2- 12DE                            bcf      _Seviced
E[224]                                        LOCAL Directive Only for Use in Macros
E[225]                                        Undefined Symbol 'IflagReg'
E[226]                                        Numeric Constant or Symbol Name Expected
E[201]                                        ')' Expected
E[225]                                        Undefined Symbol 'IflagReg'
E[226]                                        Numeric Constant or Symbol Name Expected
E[201]                                        ')' Expected

---

Setup I use is PBP2.46 to generate the ASM and Pasm4.07 to assemble it to Hex. The command lines I use are
PBPW -p16f917 test.bas
PM -l test

I just cant figure out why the Local is troubling the assembler

Jerson

You need to use the MPASM assembler. Look under Command Line Options in
your PBP manual.

PBPW -p16f917 test.bas ' <<-- this uses the default PM assembler, and will
return the errors you're seeing now.

Hey Bruce

Thank you very much. You were bang on.

Jerson