ERROR: FATAL:out of memory(pbpw.exe) pls help

I am getting the error "FATAL: out of memory(pbpw.exe)" when trying to compile with MicroCode Studio.

I have tried everything I could find in the forums about this error and nothing will fix it. I hope someone had some newer/different fixes.

The wierd thing is, I just done a complete re-install of Windows, and before the re-install it worked perfectly. The only difference this time is I chose to go ahead and install SP2, which I hadnt in the past due to some problems with it and other programs.

Is anybody using PBP and MicroCode Studio with WinXP Service Pack 2?

Any help would be very much appreiciated.

Thanks.

While I have no idea what your problem is, I have had been using PBP and MCStudio and Service Pack 2 for a long time. No problems.

OK, I got it to work. I dont know what it was but all I did was try compiling on of the MCS samples, it compiled, tried non sample code and it does try to compile now.

Although I am getting

Error C:\PBP\PBPPIC14.LIB 235 : [225] Undefined Symbol 'PORTE'
Error C:\PBP\PBPPIC14.LIB 2780 : [225] Undefined Symbol 'PORTE'
Error C:\PBP\PBPPIC14.LIB 2781 : [225] Undefined Symbol 'PORTE'
Error C:\PBP\PBPPIC14.LIB 2785 : [225] Undefined Symbol 'PORTE'
Error C:\PBP\PBPPIC14.LIB 2786 : [225] Undefined Symbol 'PORTE'
Error C:\PBP\PBPPIC14.LIB 2796 : [225] Undefined Symbol 'PORTD'
Error C:\PBP\PBPPIC14.LIB 2796 : [212] Extra Tokens on End of Line
Error C:\PBP\PBPPIC14.LIB 2867 : [225] Undefined Symbol 'PORTE'
Error C:\PBP\PBPPIC14.LIB 2885 : [225] Undefined Symbol 'PORTE'
Error C:\PBP\PBPPIC14.LIB 2909 : [225] Undefined Symbol 'PORTE'
Error C:\PBP\PBPPIC14.LIB 2916 : [225] Undefined Symbol 'PORTD'
Error C:\PBP\PBPPIC14.LIB 2916 : [212] Extra Tokens on End of Line
Error C:\PBP\PBPPIC14.LIB 2924 : [225] Undefined Symbol 'PORTD'
Error C:\PBP\PBPPIC14.LIB 2924 : [212] Extra Tokens on End of Line
Error C:\PBP\PBPPIC14.LIB 2930 : [225] Undefined Symbol 'PORTE'
Fatal C:\PBP\PBPPIC14.LIB 2930 : [300] Too Many Errors


I am tring to Compile the code below for the 16F84. Can anyone see any problems with the code? Why would I get an "Undefined PORTD and PORTE" error when compiling for the 16F84 which does not have these ports.


MyCode:


Include "Modedefs.bas"

DEFINE OSC 4

' ** Declare LCDOUT Defines **

DEFINE LCD_DREG PortB ' Set Data to PortB
DEFINE LCD_DBIT 0 ' Set starting Data to Bit0
DEFINE LCD_RSREG PortA ' Set Register Select to PortA
DEFINE LCD_RSBIT 2 ' Set RS line to PORTA.2
DEFINE LCD_EREG PortA ' Set Enable to PortA
DEFINE LCD_EBIT 3 ' Set Enable line to PortA.3
DEFINE LCD_BITS 8 ' Set for 8 bit Bus
DEFINE LCD_LINES 2 ' Set number of lines to 2

' ** Define LCD Control Constants **

I Con 254 ' Control Byte
Clr Con 1 ' Clear the display
Line1 Con 128 ' Point to beginning of line 1
Line2 Con 192 ' Point to beginning of line 2
Line3 Con 148 ' Point to beginning of line 3
Line4 Con 212 ' Point to beginning of line 4
Cgram Con 64 ' Point to Cgram within LCD
Shift_L Con 24 ' Shift display left
Shift_R Con 28 ' Shift display right

' ** Declare Variables **

SO Var PortA.0 ' Serial In Inverted
VDD Var PortA.1 ' LCD VDD pin
SO2 Var PortA.4 ' Serial In True
Rcvbyte Var Byte ' The byte received

Main:
Low VDD ' Turn Off LCD
Pause 500 ' Wait for Pic to Initialise
High VDD ' Turn On LCD
Pause 50 ' Wait for LCD to Initialize
TrisB = 255 ' Set PortB to Input
Goto Start_Disp

Goto Main ' Just In case it Missed


Start_Disp:
Gosub Clr_It ' Initialize the LCD

Start_N9600:
Serin SO,N9600,Rcvbyte ' Get Serial Data in
Lcdout Rcvbyte ' Send straight out to LCD
Goto Start_N9600 ' Loop back forever

' Initialize LCD
Clr_It:
High VDD ' Switch On LCD VDD
TrisB = 0 ' Set Port to Output
Pause 100 ' Wait for LCD to Initialise
Lcdout I,Clr
Pause 30 ' Clear the LCD
Lcdout I,Line1," LCD Serializer"
Return