Project with PIC16F818 & LM34

I came across the sample code from Rentron. I am brand new to PICBasic. What does the 10 & 13 mean in the following:

DEBUG "Temperature is: ",DEC temp," Deg F",10,13

Also, I want to store the temp in a register so that I can then write some kind of If-else code to compare it to certain ranges, and output it to a respective LED.

Thanks for the help.

Frank

Quote:

---

Originally Posted by fesparza

What does the 10 & 13 mean in the following:

DEBUG "Temperature is: ",DEC temp," Deg F",10,13

---

ASCII 10 = <LF> Line Feed
ASCII 13 = <CR> Carriage Return

Appendix D of the PBP manual "ASCII Table"

Hope that helps

This (Rentron) code is almost exactly what we need for our project. Except that we want the temperature reading to be stored in a register so that we can compare it to some values using IF-Then statements, and light up a certain LED. Is this code saving this value in the "temp" location that was defined earlier? If so, where is the 'temp' locations and what lines of code could I delete since I have no need for the serial communication to the PC?

Thanks