Creality, worst customer support

Ender 3 S1 Plus bought new March 2023, terrible service since. Started having trouble with abnormal temps within 6 months. I got fed up of useless customer support and bought a new hot-end, temperature probe, main board and display last Christmas. I'm still having the same error.

https://i.imgur.com/08uEQEv.jpg


It might crash 5 hours into a print, after 1 or 2 hours, or right off the bat like in that picture. It didn't even complete the front line of the 1st pass of 3 skirts. It's totally random.


Do NOT buy Creality. There's several other customers that have posted this error code, and they still have not fixed it over 1 year later.

I now have a giant paperweight that can't even be used as a boat anchor cause I'd be fined for polluting our waterways with electronic devices.
- my new sig line.

my ender5 plus did that a couple of times. i think i have it sorted.
make sure the thermistor is secure in its hole, don't over tighten the holding screw and cut through the insulation and do fill hole with silicon heatsink compound before inserting thermistor. never looked back since

Quote:

---

Originally Posted by richard

...do fill hole with silicon heatsink compound before inserting thermistor...

---

Now why hasn't creality ever suggested that to me. Not a question really. :mad:

Thanks for that, I have a tube coming in on Monday. :cool: I already have another hot-end / thermistor assembly beside the printer.

Did I mention that I bricked BOTH the mainboard and display cause their firmware upgrade instructions were garbage? I just left the new ones I bought at whatever version they were at.

I was forced to upgrade again now, but at least their instructions worked this time.

the motherboards are just arduino mega2650 dressed up a bit with a nice cnc coat on, you can recover them using another arduino as a icsp programmer.
i used my old mboard as a grbl core xy laser engraver just for fun, since i upgraded mine with the silent stepper drivers fancy pants board. its amazingly quiet now. its not improved the prints but they get there quietly

The Ender is relegated to small jobs, if I fix it.

Just got an Anycubic Kobra 2 Max, 420x420x500 and goes at ludicrous speed of 500.

This was out the box with no tweaking, must have been around 100, twice as fast as my Ender.

https://youtu.be/9ZpSKGI_wiU?si=Jd8R7grVSpZckzXW

Wow, this is speedy!

Happy printing!

Ioannis

Just saw this https://eu.store.bambulab.com/en-gr/products/a1

Although it has smaller printing area than Anycubic, it can color print and also has a nice feature for fuzzy printing, getting rid of the layer lines with most 3D printers.

https://www.youtube.com/watch?v=OBQ2lVl3Qnc

Ioannis

just tried the "fussy" outer shell option on my ender5+, i like it and it hardly slows a print at all . i never knew it was there until now
thanks for that, its a nice way to disguise the layers. i wonder why its in the "hidden" options for the slicer

Creality support eventually replied. They linked me to a video on how to debug the printer, but I'm supposed to video myself doing that. I'm not set up with an area to open a printer and film, I don't even have a tripod.

I'll get around to it on Soonday.

I guess they were busy building the K1C monster...

Ioannis