Syntax SEROUT2 and SERIN2 commands

Hi:

I cannot get the SEROUT2 and SERIN2 commands to compile. No matter what
the settings are.

I am able to get SEROUT and SERIN to work. I am transmitting a voltage/count from a PIC 16F684 to a PIC 16F877A output on LCD.

command on 16F877A
SERIN PortC.0, T300, [170, 170, TempIn]

command on 16F684
SEROUT portC.0, T300, [170,170], TempOut is the syntax.

The voltage count is displayed on a 4x20 LCD, but the result is always,
64, 128, which is binary 100000, and 1000000. Anyone, some ideas on how to make this simple setup work flawlessly?

bobbie

INCLUDE "modedefs.bas"
TRISB=%00000010
B0 VAR BYTE


loop:
SerOut2 PORTB.0,84,["Put a number",13,10]
SerIn2 PORTB.1,84,[DEC B0]
SerOut2 PORTB.0,84,["I took number:",DEC B0,13,10]

GoTo loop

------------------------------
For me this code has worked.You must connect your serial port with PORTB.0
and PORTB.1 with your computer.If you open terminal (Start->Accesories->Communications->Hyperterminal and set up a communication of 9600 (that means the number 84 in the above code) you must see "Put a number".

I don;t know if i helped you....