PWM on PIC16F1937

Hi guys,

i need to run 3 PWM using the PIC16F1937, all at the same frequency.
I am trying at the first stage to use CCP1 and it is not working.
Below the registers i wrote:
APFCON = %01100000
PORTA = %00000000
PORTB = %00000000
PORTC = %00000000
PORTD = %00000000
PORTE = %00000000
TRISA = %00110101
TRISB = %00000001
TRISC = %00110001
TRISD = %00000000
TRISE = %00000000
ADCON0 = %00000000
ADCON1 = %00000000
ANSELA = %00000001
ANSELB = %00000000
ANSELD = %00000000
INTCON = %00100000
PIR1 = %00000000
PIR2 = %00000000
PIR3 = %00000000
PIE1 = %00000010
PIE2 = %00000000
OPTION_REG = %00000001
WPUB = %00000011
T1CON = %00000000
T2CON = %00000110
PR2 = %11111111
CCP1CON = %00001100
CCPTMRS0 = %00000000
CCPTMRS1 = %00000000
PSTR1CON = %00000001
PWM1CON = %00000000
ECCP1AS = %00000000
CCPR1L = 100

anyone can help ?

Thanks
Rony

Have you tried getting PBP to start it?
You could then read back the values of the registers that can be read which is probably most of them.

The idea to have PBP setup the registers is good if you need 8 bit PWM. But is a start anyway...

Ioannis