Strange problem with simple program - help please

I have a 7 segment connected to my 16F690 with the following connections and configuration: My segment B & C are flickering and I cannot figure out why. Please help:

Code:

---

Include "modedefs.bas"
DEFINE OSC 8
DEFINE  NO_CLRWDT        1

#CONFIG
    ifdef PM_USED
        device  pic16F690, intrc_osc_noclkout, wdt_on, mclr_on, protect_off
    else
        __config _INTRC_OSC_NOCLKOUT & _WDT_OFF & _MCLRE_OFF & _CP_ON & _PWRTE_ON & _CPD_ON & _BOR_ON & _IESO_OFF & _FCMEN_OFF
    endif
#ENDCONFIG

        OSCCON = %01110000 ' Internal Oscillator 8MHz
        PortA=0 : PortB=0 : PortC=0
        TRISA=0
        TRISB=0
        TRISC=0
' 4 INPUTS
        INPUT PORTA.3
        INPUT PORTB.7
        INPUT PORTC.0
        INPUT PORTB.4

            OPTION_REG = %10000010  ' RAPU = off, PS 1:8 to TMR0
              ANSEL = 0              ' NO ANALOGS
        CM1CON0=0
        CM2CON0=0

' 7 SEGMENT DISPLAY
        A VAR        PortA.5
        B VAR                PortC.6
        C VAR        PortC.7
        D VAR        PortC.3
        E VAR        PortC.4
        F VAR        PortA.4
        G VAR        PortC.5
Pause 1000 ' before start to know if PIC is resetting - all segments will be off for a sec

While 1:
                A=1 :PAUSE 10 : B=1 : PAUSE 10 : C=1 :PAUSE 10 : D=1: PAUSE 10 : E=1 :PAUSE 10 : F=1 :PAUSE 10 : G=1 : PAUSE 10
Wend

---

Hi,
The chip has more than 8 analog inputs. ANSEL = 0 only sets the first 8 to digital and PortC.6 and PortC.7 which exhibits the issue is AN8 and AN9 respectively. Try adding ANSELH = 0 as well.

/Henrik.

Thanks a lot.
I missed that. Silly me ;)