Compiler/Assembler Error

Printable View

- 4th June 2005, 23:35
LT_Pic

Compiler/Assembler Error

Initially the 4.06 Assembler and 2.45 PBPW compiler has been successfully working under a WinXP Professional environment. However since past week suddenly nothing seems to work anymore. Even complete delete and reinstalltion of the whole package did not help. Any idea how to fix this ? Is this a screw up for Dos applications in the registry ?

Attached is an example error listing:

PM Assembler 4.06, Copyright (c) 1995, 2003 microEngineering Labs, Inc.
Error C:\PBP\SAMPLES\BLINK.ASM 3 : [236] Label 'PM_USED' Undefined in Pass 0
Error C:\PBP\SAMPLES\BLINK.ASM 3 : [235] Opcode Expected Instead of 'EQU'
Error C:\PBP\SAMPLES\BLINK.ASM 5 : [235] Opcode Expected Instead of 'INCLUDE'
Error C:\PBP\SAMPLES\BLINK.ASM 9 : [236] Label 'CODE_SIZE' Undefined in Pass 0
Error C:\PBP\SAMPLES\BLINK.ASM 11 : [236] Label 'RAM_START' Undefined in Pass 0
Error C:\PBP\SAMPLES\BLINK.ASM 11 : [235] Opcode Expected Instead of 'EQU'
Error C:\PBP\SAMPLES\BLINK.ASM 12 : [236] Label 'RAM_END' Undefined in Pass 0
Error C:\PBP\SAMPLES\BLINK.ASM 12 : [235] Opcode Expected Instead of 'EQU'
Error C:\PBP\SAMPLES\BLINK.ASM 13 : [236] Label 'RAM_BANKS' Undefined in Pass 0
Error C:\PBP\SAMPLES\BLINK.ASM 13 : [235] Opcode Expected Instead of 'EQU'
Error C:\PBP\SAMPLES\BLINK.ASM 14 : [236] Label 'BANK0_START' Undefined in Pass 0
Error C:\PBP\SAMPLES\BLINK.ASM 14 : [235] Opcode Expected Instead of 'EQU'
Error C:\PBP\SAMPLES\BLINK.ASM 15 : [236] Label 'BANK0_END' Undefined in Pass 0
Error C:\PBP\SAMPLES\BLINK.ASM 15 : [235] Opcode Expected Instead of 'EQU'
Error C:\PBP\SAMPLES\BLINK.ASM 16 : [236] Label 'BANK1_START' Undefined in Pass 0
Fatal C:\PBP\SAMPLES\BLINK.ASM 16 : [300] Too Many Errors
PicBasic Pro Compiler 2.45a, (c) 1998, 2004 microEngineering Labs, Inc.
All Rights Reserved.
- 5th June 2005, 00:24
mister_e

probably your path is not define in Windows Environement variable... pure guess here

Have you also try with MPASM
http://www.microengineeringlabs.com/support/mplab.htm
- 5th June 2005, 02:28
LT_Pic

That was the solution !

Steve, you are a genius. The hint with the path was absolutely correct, although it took me a while to figure out how to correct this in XP (I was familiar with MsDos, but did never try to do this in XP).

Once again thanks a lot for your geat help !!!

Michael
- 5th June 2005, 09:12
mister_e

You're welcome, great to now it works for you now.

Quote:

Originally Posted by lt_pic

Steve, you are a genius.

yeah i know ;)
- 21st July 2005, 00:40
Danish

Button

hello can anyone help me out here i dont understand the command BUTTON completely. In the commnad you have to write the pin, down, delay, rate, var,action, and label the thing i dont understand is what does RATE MEAN!!!!
and i am using a PICBASIC compiler

i would appreciate a reply
- 21st July 2005, 00:56
NavMicroSystems

Quote:

Originally Posted by Danish

hello can anyone help me out here i dont understand the command BUTTON completely. In the commnad you have to write the pin, down, delay, rate, var,action, and label the thing i dont understand is what does RATE MEAN!!!!
and i am using a PICBASIC compiler

i would appreciate a reply

Well,
you don't understand BUTTON
I don't understand your post on this thread,
(The BUTTON statement was not the topic of the thread!)
however:
a look at Manual Section 5.6 should answer your question.
- 21st July 2005, 01:55
Danish

Looking For A Circuit For Pic16f84

I Am Looking For A Project That Uses The Microcontroller Pic16f84 Or Any Other Microcontroller Can Someone Give Me A Schematic And Information The Project.

I Will Really Appreciate It
Thank You
- 21st July 2005, 09:47
Luciano

Please start a new thread for your request.
This thread is about "Compiler/Assembler Error".

(Use the button "New Thread").