16F886 (illegal opcode CONFIG1)

I am adding DT’s INT_INT to an existing and functioning program I assembled with PM. Now using MPASM I am having problems with the config’s.

16F886, MicroCode Studio Plus, MPASM, internal osc @8Mhz

ERROR[122] (illegal opcode CONFIG1)
I found an example by mackrackit from 10JUNE,2010 and tried his example but it failed also.

I’m using:
@ __config _CONFIG1, (_INTRC_OSC_NOCLKOUT & _WDT_ON & _MCLRE_OFF &_LVP_OFF & _CP_OFF)

OSCCON = %01110000
DEFINE OSC 8

I’ve tried with and without the comma (,) after CONFIG1, I’ve tried with and without the brackets, and the error always says “illegal opcode CONFIG1.” I've used CONFIG1 in upper case and lower case, no go!

Its got me stumped,Comments please!

Are you sure you have the 16F886 selected in the Microcontroller dropdown box of MicroCode Studio?

16F886 is in the dropdown window! yep!

Under View > Compile and Program Options > Assembler tab ...
Is the path above the Find buttons ... C:\Program Files\Microchip\MPASM Suite or C:\Program Files (x86)\Microchip\MPASM Suite for 64-bit systems?

If not, click the Find manually button and point it there.
MicroCode Studio will usually find the wrong path if you have more than one MPASMWIN on your computer.

My path is C:\Program Files\Microchip\MPASM Suite. Yes, I am aware of this Gottcha! I had to deal with it a few years ago. I double checked it to make sure something didn't revert back to the Wrong MPASM. This just doesn't make any since. I even tried to use @config (0x20F4) but that didn't work either. I also checked my spellling four times to make sure... what else?

Darrel, On the assembler tab page, what is INH8XM, INH8XS, and INHX32?

Those specify the .HEX file format and should not be changed.
Later versions of MicroCode Studio have removed those options.

Please send me your .LST file after a failed compile.

You'll have to explain how I send it to you. I can't use Private Message.

[email protected]

Although the line you showed in post #1 had 2 underscores in __config and had a space after the @ sign ...
The .lst file shows that the actual line had only 1 underscore and no space.

It also shows that the __config line in the 16F886.inc file hasn't been commented out.

OK, so once I commented out the __config default line in the PBP INC file it compiled without errors.

As always, Thanks Darrel

Wayne

HELLO, I HAVE THE SAME PROBLEM YOU HAD SOLVED. PLEASE HELP ME TO COMPILE THIS CODE.

Code:

---


DEFINE OSC 4
@ DEVICE pic16F876
@ DEVICE pic16F876, WDT_OFF
@ DEVICE pic16F876, PWRT_On
@ DEVICE pic16F876, PROTECT_OFF


TRISA=%11111111
TRISB=%00000000
TRISC=%00000000
PORTA=0
PORTB=0
PORTC=0


DEFINE LCD_DREG      PORTB   
DEFINE LCD_DBIT      4       
DEFINE LCD_RSREG  PORTB   
DEFINE LCD_RSBIT  2   
DEFINE LCD_EREG      PORTB   
DEFINE LCD_EBIT  3       
DEFINE LCD_BITS      4   
DEFINE LCD_LINES  2


DEFINE CCP1_REG  PORTC
DEFINE CCP1_BIT  2


ON INTERRUPT GoTo KESME
ADCON1 = 7
OPTION_REG=%10000010       
INTCON=%10100001         
TMR0=0
T2CON = %00000110
PR2=124         


SYMBOL YUKARI=PORTA.0
SYMBOL  ASAGI=PORTA.1
SYMBOL ARTTIR=PORTA.2
SYMBOL  AZALT=PORTA.3
SYMBOL    JOG=PORTA.4
SYMBOL    DUR=PORTA.5


ROLE  VAR PORTC.3
LED1  VAR PORTC.1
LED2  VAR PORTC.0


MODS    VAR BIT
YON      VAR BIT
U        VAR BYTE
W        VAR BYTE
ADR      VAR BYTE
SAYIH    VAR BYTE
SAYIL    VAR BYTE
SON      VAR BYTE
SYC      VAR BYTE
SNY      VAR BYTE
SAYAC    VAR BYTE
DUTY    VAR BYTE
I        VAR WORD
PERYOT  VAR WORD
HAM_DUTY VAR WORD
FREKANS  VAR WORD


PAUSE 200
LCDOUT $FE,1
GIRIS:
LCDOUT $FE,$83,"INVERTER"
LCDOUT $FE,$C4,"WITH PWM"
PAUSE 1500
LCDOUT $FE,1


DUTY=0:LED1=0:LED2=1


GOSUB FREKANS_HESAP
GOSUB EKRAN
GOSUB DUTY_YAZ
GOSUB PWM_ON


BASLA:
IF DUTY>0 THEN
IF JOG=0 AND YON=0 THEN
  YON=1
  SON=DUTY
  GOTO SAG
ENDIF


IF JOG=0 AND YON=1 THEN
YON=0
SON=DUTY
GOTO SOL
ENDIF
ENDIF


IF DUR=0 and duty>0 THEN
GOTO DURDUR
ENDIF


GOSUB FREKANS_HESAP
GOSUB DUTY_KONTROL
GOSUB FREKANS_KONTROL


GOTO BASLA


FREKANS_KONTROL:


IF ARTTIR=0 THEN
WHILE ARTTIR=0:WEND
PR2=PR2-1
gosub DUTY_YAZ
IF PR2<5 THEN PR2=5
ENDIF


IF AZALT=0 THEN
WHILE AZALT=0:WEND
PR2=PR2+1
gosub DUTY_YAZ
IF PR2>124 THEN PR2=124
ENDIF
GOSUB EKRAN
RETURN


DUTY_KONTROL:
IF YUKARI=0 THEN
sayac=0
DUTY=DUTY+1
IF DUTY=101 THEN DUTY=100
gosub DUTY_YAZ:GOSUB EKRAN
 WHILE YUKARI=0
 W=1
 IF SAYAC=>50 THEN
  W=0:SAYAC=50
  DUTY=DUTY+1:GOSUB DELAY
  IF DUTY=101 THEN DUTY=100
 ENDIF
 GOSUB DUTY_YAZ
 GOSUB EKRAN
 WEND
 W=0:SAYAC=0
 ELSE
 W=0:SAYAC=0
ENDIF


IF ASAGI=0 THEN
sayac=0
DUTY=DUTY-1
IF DUTY=255 THEN DUTY=0
GOSUB DUTY_YAZ
GOSUB EKRAN
 WHILE ASAGI=0
 W=1
 IF SAYAC=>30 THEN
  W=0:SAYAC=30
  DUTY=DUTY-1:GOSUB DELAY
  IF DUTY=255 THEN DUTY=0
 ENDIF
 GOSUB DUTY_YAZ
 GOSUB EKRAN
 WEND
 W=0
 ELSE
 W=0:SAYAC=0
ENDIF
 
RETURN


SAG:
DUTY=DUTY-1:GOSUB DELAY
IF DUTY>100 THEN
ROLE=1:LED1=1:LED2=0
GOTO DUTY_ARTTIR
ENDIF
GOSUB DUTY_YAZ:GOSUB EKRAN
GOTO SAG


DUTY_ARTTIR:
DUTY=DUTY+1:GOSUB DELAY
GOSUB DUTY_YAZ:GOSUB EKRAN
IF DUTY=SON THEN
GOTO BASLA
ENDIF
GOTO DUTY_ARTTIR


DURDUR:
DUTY=DUTY-1:GOSUB DELAY
GOSUB DUTY_YAZ:GOSUB EKRAN
IF DUTY=0 THEN
GOTO BASLA
ENDIF
GOTO DURDUR


SOL:
DUTY=DUTY-1:GOSUB DELAY
IF DUTY>100 THEN
ROLE=0:LED1=0:LED2=1
GOTO DUTY_ARTTIR
ENDIF
GOSUB DUTY_YAZ:GOSUB EKRAN
GOTO SOL




DELAY: 'gecıkme
  FOR I=0 TO 255:NEXT
RETURN
DELAY1:
  FOR I=0 TO 150:NEXT
RETURN


FREKANS_HESAP:
FREKANS=62500/(PR2+1)
RETURN


DUTY_YAZ:
HAM_DUTY=(PR2+1)*DUTY/25
CCP1CON.4=ham_DUTY.0
CCP1CON.5=HAM_DUTY.1
CCPR1L=HAM_DUTY>>2
return


PWM_ON:
CCP1CON.2=1
CCP1CON.3=1
RETURN


PWM_OFF:
CCP1CON.2=0
CCP1CON.3=0
RETURN


EKRAN:
LCDOUT $FE,$80,"Duty %",#DUTY
IF DUTY<100 THEN
GOSUB HANE_AL1
LCDOUT $FE,ADR,$20
ENDIF
lcdout $fe,$C0,"FREKANS=",#FREKANS
GOSUB HANE_AL2
RETURN


HANE_AL1:
IF DUTY<100 OR DUTY>9 THEN ADR=$88
IF DUTY<10 THEN ADR=$87
RETURN
HANE_AL2:
IF FREKANS>10000 THEN LCDOUT $FE,$CD,"Hz"
IF FREKANS<10000 AND FREKANS>999 THEN LCDOUT $FE,$CC,"Hz "
IF FREKANS<1000 THEN LCDOUT $FE,$CB,"Hz "
RETURN


DISABLE
KESME:
IF W=1 THEN
      SAYAC=SAYAC+1
      IF SAYAC=101 THEN SAYAC=0       
ENDIF
INTCON.2=0   
RESUME
ENABLE


END

---

Quote:

---

Originally Posted by iboniang

HELLO, I HAVE THE SAME PROBLEM YOU HAD SOLVED. PLEASE HELP ME TO COMPILE THIS CODE.

---

I suggest you first re read this thread

your configs . . .
@ DEVICE pic16F876
@ DEVICE pic16F876, WDT_OFF
@ DEVICE pic16F876, PWRT_On
@ DEVICE pic16F876, PROTECT_OFF
only work with the PB compiler, They DO NOT WORK WITH MPASM