Hi!
Need some help , how can i use the Serout command with an 18f4550 , and put the out at 19200 bauds, i use an 20mhz cristal.
What need to change ?
Tanks in advance
Fernando
Printable View
Hi!
Need some help , how can i use the Serout command with an 18f4550 , and put the out at 19200 bauds, i use an 20mhz cristal.
What need to change ?
Tanks in advance
Fernando
Use the SEROUT2 command.
Cheers
Al.
This may help: http://melabs.com/resources/ser2modes.htm