Help re 18f6722 & two i2c ports

[LIST]
Im using a 18F6722 and, until now, have only needed to use one of the two I2C ports. I previously set up I2C port #1 like this:

SSP1CON1.5=1
SSP1CON1.3=1
SSP1CON1.2=0
SSP1CON1.1=0
SSP1CON1.0=0

and it has been working fine. Now that I need to use I2C port #2 as well, I don't know what to set up. If I don't set anything, the lines aren't even pulled high by the pullup resistors. If I set the SSP2CON bits the same, the lines likewise do not go high. Maybe both I2C ports can't be in 'Master' mode?

Any suggestions would be helpful at this point.

Thanks

Please disregard. TRIS overlooked.