Which is the frequency?

Which is the frequency of this program?
I am using a pic16f876 with a 20Mhz Quartz...
Should it be same 20Mhz or not?
Thank you!!


i var word

TRISC = 0
PORTC = 0


inizia:

PORTC = %00000000
for i=0 to 255
PORTC = PORTC + %1
NEXT
goto inizia

end

With the oscilloscope it comes out a frequency of 200 khz.
A change of state for the LSB every 5 microseconds.
Is it right?
How can i have 20 MHz as the crystal resonator???

Try this. At 20MHz you should have a 500kHz signal on the pin used.

Code:

---

DEFINE OSC 20
TRISB.0 = 0

ASM
loop ; @ 20MHz 1us high + 1uS low
    bsf portb,0  ; 200nS
    goto $+1      ; 600nS
    goto $+1      ; 1000nS high
    bcf portb,0  ; 200nS
    goto $+1      ; 600nS
    goto loop    ; 1000nS low
ENDASM

---

just bear in mind that the pic will divide whatever the clock frequency is by 4
ie: if you have a 20mhz crystal, it will perform funcions @5mhz or one operation per 1/4 millionths of a second.