Ir problem sending data

HELLO . IM USING PIC16F628 TO SENT CHARACTERS TO PIC16F84 VIA IR , BUT WHEN I SEND 12 I GET 03 OR SOME STRANGE NUMBERS I TRYED TO CHANGE BAUDS AND Initialize hardware PWM , RUNING ON 4MHZ OSC , NEED HELP THIS IS MY CODE


TRNASMITTER IR ,PIC16F628A

Code:

---

    @ DEVICE INTRC_OSC_NOCLKOUT, LVP_OFF, MCLR_OFF, WDT_OFF
    DEFINE INT_OSC 4
   
    B0        VAR byte 
    Baud        CON 16780
    'Initialize hardware PWM - IRLED 40KHz drive
    PORTB    = %00000000 
    TRISB    = %00000000 
    CCPR1L    = 12        ' Set PWM Duty-Cycle to 50%
    PR2      = 24        ' Set PWM for 40KHz
    CCP1CON  = %00001100  ' Mode select = PWM
    T2CON    = %00000100  ' TMR2 ON 1:1  pre-scale
                         
Start:
  conversion
      B0 = 12

 
    SEROUT2  PORTB.1,Baud,[dec2 B0]
 
    PAUSE  1000     
    GOTO    Start

---

HERE IS RECEIVER IR .
PIC16F84A

Code:

---

include "modedefs"
define osc 4

PORTB = 00001111
TRISB = 00001111
B0 VAR byte


MAIN:
SERIN2 PORTB.3,16780,[DEC2 B0]' I GET STRANGE CHARACTERS OR NOTHINGS
pause 100
SEROUT2 PORTB.4,16780,[DEC2 B0], SEROUT2 IS SET WORKING GOOD
GOTO MAIN
END

---