New to PBP

Hello, I just found PBP at my local college and I am trying to build my first program for a 12F683 but it seems that I can't get the inline assembly right. So far I've got everything right, but I'd like to set the configuration fuses so the watchdog timer doesn't reset on me. I copy and pasted this from an other thread:
@ DEVICE PIC12F683,MCLR_OFF,INTRC_OSC_NOCLKOUT,WDT_OFF,BOD_ ON, PWRT_ON

Also from http://www.picbasic.co.uk/forum/showthread.php?p=69895
@ DEVICE pic12F683, WDT_Off
Doesn't even work.

Here's my error

Code:

---

Warning[207] C:\RFID\UNTITLED.ASM 95 : Found label after column 1. (DEVICE)
Error[122]  C:\RFID\UNTITLED.ASM 95 : Illegal opcode (pic12F683)

---

The computer I'm using has MPLab8.15a and PBP 2.47 it looks like from the compile window. Commenting out the line clears the error.

The Config statement you are trying to use is for the "DEFAULT" assembler and apparently the microcode Studio is set to use MPASM.
Please read this link: http://www.picbasic.co.uk/forum/showthread.php?t=543

Here is the MPASM config statement you are using when you comment the one in your code out: __config _INTRC_OSC_NOCLKOUT & _WDT_ON & _MCLRE_ON & _CP_OFF , it is located in the file named 12F683.inc, and is located in the root directory of PBP. You can change it there or better yet, put a semicolon just ahead of it and put it directly in your code every time and be master over it. Here is what you want in your code:

@ __config _INTRC_OSC_NOCLKOUT & _WDT_OFF & _MCLRE_ON & _CP_OFF
Alternatively you can switch assemblers, in MCS back to the default, by unchecking " USE MPASM".
Click view, compile and program options, assembler tab . . .

Thank you so much, the post you linked to made so much sense. I dont see how I missed that. I understand how to configure it, but I don't understand why I have to edit the include file. Are those there just for the beginners who don't need to mess with the configuration fuses just yet?